Typ der Flanschdichtung mit Gewinde aus Kohlenstoffstahl:
Konvexe Oberfläche (RF), volle Ebene (FF). Andere Dichtflächenabmessungen können nach Kundenwunsch angepasst werden.
Herstellungsprozess des Gewindeflansches aus Kohlenstoffstahl:
1. Der gesamte Schmiedevorgang von Rundstahl;
2. Schmieden, Schneiden und Formen von Fertigprodukten;
3. Technologie zum Schneiden und Stanzen von Stahlplatten;
4.Blankschmieden, Ringexpansionsmaschine Heißexpansionsproduktionsprozess; Produktionsstandards: Amerikanischer Standard, Deutscher Standard, Europäischer Standard, Britischer Standard, Japanischer Standard und Südafrikanischer Standard
Produktionsstandard für Gewindeflansche aus Kohlenstoffstahl nach britischem Standard
Spezifikation:
BS4504 113 PN6 DN10-DN150
BS4504 113 PN10 DN10-DN150
BS4504 113 PN16 DN10-DN150
BS4504 113 PN25 DN10-DN150
BS4504 113 PN40 DN10-DN150
Gewindeflansch TH Nationaler Standard: GB / T 9114-2010 gerippter Stahlrohrflansch Die PN-Kennzeichnung hat 12 Druckstufen: PN2,5, PN6, PN10, PN16, PN25, PN40, PN63, PN100, PN160, PN250, PN320 PN400.
Die Klassenmarke hat sechs Druckstufen: Klasse 150, Klasse 300, Klasse 600, Klasse 900, Klasse 1500, Klasse 2500
Der Gewindeflansch aus Kohlenstoffstahl kann unterteilt werden in: (20 #, A3, Q235A, Q235B, 20G, 16Mn, ASTM A234WPB, ASTM A105 usw.);
Standardklassifizierung
Spezifikation: 1/2&"~ 80 GG"; (DN 10-DN5000)
Druckstufe: 0,25 MPa - 250 MPa (150 lb - 2500 lb)
Gemeinsame Standards:
Nationaler Standard: GB9112-88 (GB9113 · 1-88 ~ GB9123 · 36-88)
Amerikanischer Standard: ANSI B16.5, ANSI 16.47, Klasse 150, 300, 600, 900, 1500 (TH, LJ, SW) Japanischer Standard: JIS 5K, 10K, 16K, 20K (PL, SO, BL)
Deutsche Norm: DIN2527, 2543, 2545, 2566, 2572, 2573, 2576, 2631, 2632, 2633, 2634, 2638 (PL 、 SO 、 WN 、 BL 、 TH)
Britischer Standard: BS4504,4506.
http://de.haokunflanges.com/